长山群岛海洋渔业资源的平均营养级变化特征     

孙才志  曹威威  肖春柳 《海洋通报》2019,38(1):87-95

根据长山群岛 1965-2016 年渔业统计资料，分析长山群岛海域主要捕捞渔获物产量、平均营养级 （Mean trophic level， MTL）、渔业均衡指数 （Fishing in balance index，FiB） 年际变化，探讨其海洋渔业资源利用状况，并利用小波分析方法研究52年来渔获物 MTL 周期变化特征。研究表明： （1） 长山群岛捕捞产量、MTL 和 FiB 指数呈阶段性变化； （2） 长山群岛渔业资源开发经历初期开发、扩张捕捞、过度捕捞、资源破坏等四个阶段，渔业资源环境正在逐渐恶化；（3） 受人类捕捞活动影响，MTL 在 15~19 年和 24~34 年两种时间尺度下呈周期波动，30 年为第一主周期，17 年为第二主周期。长山群岛渔业资源破坏日益严重，未来几年平均营养级将呈下降趋势。为防止渔业资源进一步衰退，应加强捕捞活动管理力度，落实海洋渔业资源保护制度；完善预警机制，构建海洋渔业资源监测系统；同时应积极调整长山群岛渔业产业结构，提高资源产出效率.  相似文献   

堆积阶地古老滑坡识别方法及其在线状工程地质勘察中的应用     

安玉科  樊江  马胜午  马建全  高娟  毛立军 《吉林大学学报(地球科学版)》2020,50(6):1787-1794

阶地型古老滑坡体形成后，长期受各种营力影响，导致古老滑坡地貌形态破坏严重甚至消失。目前遥感技术和普通工程地质调绘很难发现这些滑坡的存在，给工程建设和后期运营造成较大安全隐患。为准确识别形态特征不明显的古老滑坡体，从阶地物质结构特征演变入手，找到阶地受剪切破坏产生的典型物质结构特征，将地层结构错断、卵砾石异常定向排列、摩擦镜面和泥包粒的眼球构造等作为滑坡准确识别依据。首先采用沿沟谷进行工程地质测绘的纵横交错追踪法确定滑坡体纵向范围和滑面形状，再结合地貌特征推测各级、块滑坡平面范围和分布，最后用点状勘探工程验证和校正推测结论。可将其总结为由"地貌异常、沿沟追踪、面上推断、点状校验"组成的阶地型滑坡识别方法，即物质结构异常推断法。结合线状工程勘察设计各阶段工作特点，提出线状工程前期工作中阶地型滑坡识别步骤，并在临渭高速公路工程建设项目中取得成功应用。  相似文献   

基于概率积分法的采动坡体稳定性预测与分析          下载免费PDF全文

王猛  孙丽丽  薄怀志 《山东国土资源》2018,34(12)

地下采煤会引起地表沉降、变形,甚至引发山体、河堤滑坡等地质灾害。采动坡体的稳定性研究一直是采矿工程中实际关心的问题。该文首先介绍分析了概率积分法移动变形稳态、动态预测模型以及基于极限平衡理论的单滑面采动坡体稳定性预测模型,提出了使用概率积分法结合Knothe时间函数对采动坡体稳定性进行预测分析的方法,并使用C#及XML Schema语言编制了相关的计算程序。最后,结合一个工程实例对采动坡体稳定性和动态变化过程进行了预测与分析,通过实测数据验证了提出方法的可行性,得出了采动引起的坡体下沉是影响坡体稳定性的主要因素,并提出了在坡体拉伸阶段进行注浆加固的方法。  相似文献   

杭州湾中部实测波浪特性分析   总被引：1，自引：0，他引：1  

杨斌  杨忠良  叶钦  张俊彪  施伟勇 《海洋工程》2018,36(3):96-103

利用杭州湾中部一年实测波浪资料,分析该地区的波参数统计变化特性,采用最小二乘法拟合得出相关参数之间的关系式,并统计分析了频谱特性。结果表明:杭州湾中部以小浪和轻浪为主,在各月分布较为均匀,年平均周期为2.97 s;最大一次波浪过程为冷空气影响所致,影响强度大于台风莫拉克;常浪向分布在东北至东南向,其中又以小浪出现较多,对应的波周期以2~4 s为主;强浪向主要分布在西北和东北方向,对应的波周期主要分布在3~5 s;多数特征波参数之间相关关系较好;由谱分析得知风浪占多数,且以单峰为主。研究结果可为相关工程和理论研究提供基础资料。  相似文献   

基于高斯两步移动搜寻法的村镇避难场所可达性研究     

但文羽  肖映辉  胡周灵  詹庆明 《地球信息科学学报》2018,20(10):1412-1421

避难场所可达性是指避难场所与受灾居民之间的通达性,即灾害发生时,避难人员通过避难疏散通道到达避难场所的难易程度,是评价避难场所布局合理性的重要指标。本研究结合高斯两步移动搜寻法和网络分析法,从供需双向出发对村镇地区避难场所进行可达性分析。2种方法的结合,既充分考虑了需求点与设施点的相互作用,又充分考虑了设施点的吸引力随距离的衰减关系,并基于实际道路,以步行疏散时间作为搜索半径,降低了传统研究中因忽略供需间相互作用及实际距离而引起的可达性结果的误差。最后,以神农架松柏镇区为例,验证该方法的实际应用价值。结果表明,该方法能够有效测定村镇地区避难场所的空间可达性,同时,基于GIS软件可以直观地揭示研究区域内避难场所可达性空间分布差异。该方法可为制定科学的村镇防灾减灾规划提供方法支持。  相似文献   

基于全球分布的地震观测数据估计0S0模态的特征频率及品质因子     

周丰森  王迪晋  旦增 《大地测量与地球动力学》2019,39(10):1013-1016

选取2011-03-11日本MW9.3地震后全球地震台站记录的约220 h波形数据，基于一定的判断准则，筛选出质量较高的448个垂向观测数据，采用频域AR方法对0S0模态的特征频率和品质因子进行估值，并以信噪比为权重进行加权平均，得到特征频率f=0.814 658 4±5.3×10-7，品质因子Q=5 586±12。该结果与已有研究成果相比精度更高，有助于约束现有地球介质密度和衰减模型，使其更接近真实地球。  相似文献   

A New Wavelet Method for Identification of Eddies and Assessment of Incidents on Islands of the Eastern Caribbean     

Jason D. Tambie  Madiha Farag-Miller  Keith Miller  Bheshem Ramlal  Michael Sutherland 《Marine Geodesy》2019,42(3):227-245

Using two dimensional continuous wavelet transforms, a novel method for identification of mesoscale eddies is presented to facilitate extraction of characteristics for area, amplitude, type, and location from maps of sea level anomalies. In comparison with the previously established growing method for eddy identification, it is found that the wavelet method identifies more than twice the number of eddies and is particularly better at resolving small eddies down to the 0.25 degree resolution of the data. Such research into eddy identification and tracking is significant to the assessment of eddies with potential to impact on coastlines of small islands. The method is applied to the identification of eddies on tracks towards islands of the Eastern Caribbean over 23?years. Spatial and temporal variation in rate of occurrence and magnitude is established. For Barbados there is an average of 9 anticyclonic incidents a year with maximum amplitude of typically 0.22?m in the dry seasons and 0.16?m in the wet seasons. Seasonal variation is reversed for the other islands with twice the number of anticyclonic incidents having maximum amplitudes of about 0.20?m annually.  相似文献   

Global method for stability analysis of anchored slopes     

Tan Zhang  Hong Zheng  Cong Sun 《国际地质力学数值与分析法杂志》2019,43(1):124-137

Based on the global method, an approach is proposed to consider the effect of anchor reinforcement on slope stability, where equilibrium conditions are formulated in terms of the whole slip body. Anchor pre-tension is assumed to be undertaken by the whole slip body instead of individual slices, causing internal force within slope more realistic. Meanwhile, the optimization model for locating the critical slip surface is of weak nonlinearity and easy to solve using the conventional optimization procedures. The effects of anchoring orientation and position are thoroughly investigated, and interesting results are obtained.  相似文献   

Fully coupled elastoplastic hydro-mechanical analysis of unsaturated porous media using a meshfree method     

Omid Ghaffaripour  Golnaz A. Esgandani  Arman Khoshghalb  Babak Shahbodaghkhan 《国际地质力学数值与分析法杂志》2019,43(11):1919-1955

This paper presents the first application of an advanced meshfree method, ie, the edge-based smoothed point interpolation method (ESPIM), in simulation of the coupled hydro-mechanical behaviour of unsaturated porous media. In the proposed technique, the problem domain is spatially discretised using a triangular background mesh, and the polynomial point interpolation method combined with a simple node selection scheme is adopted for creating nodal shape functions. Smoothing domains are formed on top of the background mesh, and a constant smoothed strain, created by applying the smoothing operation over the smoothing domains, is assigned to each smoothing domain. The deformation and flow models are developed based on the equilibrium equation of the mixture, and linear momentum and mass balance equations of the fluid phases, respectively. The effective stress approach is followed to account for the coupling between the flow and deformation models. Further coupling among the phases is captured through a hysteretic soil water retention model that evolves with changes in void ratio. An advanced elastoplastic constitutive model within the context of the bounding surface plasticity theory is employed for predicting the nonlinear behaviour of soil skeleton. Time discretisation is performed by adopting a three-point discretisation method with growing time steps to avoid temporal instabilities. A modified Newton-Raphson framework is designed for dealing with nonlinearities of the discretised system of equations. The performance of the numerical model is examined through a number of numerical examples. The state-of-the-art computational scheme developed is useful for simulation of geotechnical engineering problems involving unsaturated soils.  相似文献   

A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests     

Hua-Xiang Zhu  Zhen-Yu Yin  Qiang Zhang 《国际地质力学数值与分析法杂志》2020,44(3):389-404

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.  相似文献